Dual Frequency Oscillator (DFO) + Switchless mod for Sega Genesis/Megadrive
This was not tested on Model 3
This mod regroup on a same design:
- The Dual Frequency Oscillator (DFO) with frequencies for both PAL and NTSC
- The Switchless mod (with DForce3000 code) which cycles between USA/JAP/EU region for video signal and language settings and RGB led support.
The kit contains:
- A PCB already programmed with Sega Genesis/Megadrive frequency (you don't need the programmer)
- A PCB for the RGB LED (they will be populated with proper components, pics are here as exemple). You need to select the model of your console.
Note: There's a jumper underneath the PCB, next to the PIC: This is to select "Active-high" or "Active-low" reset depending of your console.
Exemple: MK1 VA4 is active-high, M5 PAL (no marking) is active-low, MK2 V1.8 is active-low, etc.
Basically, if there's a 510k ohms resistor (should be R2) between the reset switch of your console and ground, your console is Active High and need the jumper to be soldered)
Here's a video of my installation on my own console.
Dual Frequency Oscillator (DFO) + switchless mods for Sega Genesis/Megadrive
- Product Code: DFOSwitchless
- Availability: 4
-
USD $25.00
- Ex Tax: USD $25.00
Available Options
Related Products
Dual Frequency Oscillator (DFO) USB programmer
Dual Frequency Oscillator (DFO) USB programmerProgram your own Dual Frequency Oscillator with this d..
USD $28.00 Ex Tax: USD $28.00
Tags: DFO, Dual Frequency Oscillator, Megadrive, Sega, Genesis, Switchless,